Elite Min E Lite Cold Frame

Manufactured from strong, extruded aluminium which is both long lasting, low maintenance and light weight. Select from either a plain, standard finish or with a smart, hard-wearing, powder coated finish.

Choose a cold frame with UPCV Bar Capping to create a more decorative, professional finish to your cold frame. The bar capping will be supplied to match the colour of the frame – or with a standard, plain finish, you can specify the colour you would like.  

Supplied with 3mm toughened glass glazing as standard. If you would prefer the cold frame to be supplied with 6mm polycarbonate please ask for a quotation. 

Dimensions:
Floor Width 2ft 4in / 71cm
Gutter To Gutter Width 2ft 7in / 78cm 
Eaves Height 1ft 4in / 40.6cm
Ridge Height 2ft 3in / 68.5cm

Three lengths available:
4ft 5in / 133.6cm – including 2 vents or 
6ft 5in / 195.6cm – including 3 vents or 
8ft 5in / 257.4cm – including 4 vents.

 

 

Please note: it is recommended that the Min E Lite is anchored down. To enable this to be done Elite include some unequal angle brackets as standard. These are used internally, and screwed into the hard standing the cold frame is stood on. The nuts and bolts are provided to attach the brackets to the cold frame but the screws are NOT included to anchor down to the floor (this is due to different types of screws being needed depending on what the floor is, e.g. concrete, wood, stone etc.)  

Please Note: Elite use their own transport to deliver their cold frames.  Please allow 4-5 weeks for delivery on plain frame models and 8-10 for painted models.